|
For that reason this loudspeaker should only be used in AER horn systems for example the AER EXCenter Horn in the following called AER EXCH. Used this way the AER MD 3 in our opinion is the summit of the physically and acoustically possible. Listening to the AER MD 3 a tremendous and beautiful mid range is spread crowned by a fantastically brilliant soft and mild high and super high range -far up to the supersonic range. |
|
|
||||||||||||||||
|
|
||||||||||||||||
|
|
![]() |
|
|
|
||||||||||||||||||||||||||||||||||||||
|
The pole plates are dimensioned in a way that the neodymium magnet is protected against magnetic field distortions of the voice coil very well. It has a very high cross section area and inside a low electrical impedance. Along the whole air gap length all lines of the magnetic field are used for the transmission of force. The widened air gap allows an excursion of the moving membrane of 10 millimetres without leaving the linear motorized area also at tremendous impulses. The MD 3B was intentionally designed as a real fullrange drive-unit to get a controlled base. It is designed according to the modified AER Formulas and appears with a very flat frequency response curve and a reduced high efficiency. The high mass of the whole magnetic construction guarantees an extraordinary stability of the sound stage. |